Configuring Local Ethernet

Manual and automatic configuration using the DHCP protocol.


Be careful!
If you select Local Ethernet and set it as External Ethernet, you will not be able to access the Internet.


Manual Configuration

To configure the connection in the web interface, follow these steps:

1. Go to the menu Services -> Network Interfaces.
2. Click on the icon (+) in the upper right corner of the window and select Local Ethernet.1. Configuring Local Ethernet.png

3. Select a network card.
4. Fill in the fields listed below:

The Gateway field in the Local interface is set only if:
- There is no External UTM interface;
- UTM is only used as a proxy.

Configuration example:
2. Configuring Local Ethernet.png

Automatic Configuration

It is used if your Internet provider supports the ability to automatically configure the Ethernet interface using the DHCP protocol.

  1. Go to menu Services -> Network interfaces.
  2. Click on the icon (+) in the upper right corner of the window and select Local Ethernet.
  3. Select a network card.
  4. Fill in the Title field. The VLAN tag field is filled in only if the network card is already in use.
  5. Enable Automatic configuration via DHCP.
  6. Make sure that the entered values are correct and click Save.
Configuration example:
3. Configuring Local Ethernet.png

Revision #6
Created 25 August 2022 20:36:44 by Val Redman
Updated 13 October 2022 15:12:35 by Val Redman