Configuring Proxy with Single Interface

If necessary, you can use SafeUTM as a proxy server with direct connections of clients to the proxy, with a single interface.


To do this, you need to perform the following settings:

  1. When creating a local interface in Services -> Network interfaces, Gateway needs to be specified:

    1. Configuring Proxy with Single Interface.png

  2. Allow direct connections to the proxy server on the tab Services -> Proxy by selecting the desired port from the list:

    2. Configuring Proxy with Single Interface.png

When using SafeUTM as a proxy server with direct connections to the proxy, most of the functions will work normally, but with some peculiarities:


Revision #3
Created 27 August 2022 13:08:57 by Val Redman
Updated 13 October 2022 15:24:30 by Val Redman