Skip to main content

Initial Configuration

Connection to SafeUTM Web Interface

If you haven’t installed SafeUTM yet, please go to Installation Process

After you have successfully installed SafeUTM you can start its initial configuration.

Start an internet browser on any local network computer, for example, Mozilla Firefox or Google Chrome (Internet Explorer is not supported). In the address bar type in the local IP-address indicated in the settings during the local network interface installation, and port 8443 used by the web interface in the format:

IP-address:port

Example: 192.168.100.2:8443

As encryption is used during connection to the web interface, the internet browser may display an error saying the security certificate was not issued by a trusted certificate authority. In such a case you need to continue to the website by clicking on the corresponding button in the bottom of the window.

Error example in Google Chrome:


43354354.png1. Initial Configuration.png

When you continued to the website using the IP-address, in the browser window an SafeUTM web interface authorization window will open. Type in the admin account login and password information you used during SafeUTM installation.

In order to avoid the error in the future, import the UTM root certificate into the browser.

There are three ways to download the certificate:

  1. Go to Services -> TLS Certificates, click on Download root certificate:
    Picture4.png2. Initial Configuration.png
  2. Go to Traffic rules -> Content filteringfilter -> Settings:
    Picture5.png3. Initial Configuration.png
    You can also download the root certificate by logging in to any existing user’s SafeUTM account:
    Picture6.png

    After you first log in, you will see a few notifications that will advise you that in order to work correctly SafeUTM needs to set up a connection to the provider and register a server.

    Picture7.png5. Initial Configuration.png

    Setting up Connection to the Internet Provider

    In order to set up a connection to the provider go to Services – Network interfaces.

    Ethernet connection setup

    This type of connection requires setting up the parameters described in the table below.

    Parameter

    Note

    NICNetwork card

    It is necessary to identify the network adaptor that will be used to connect to the internet provider. To identify the adaptor, you can use either the manufacturer’s name or MAC-address.

    IP-address and mask

    The network credentials assigned by the provider. Specify the IP-address and net mask as CIDR or a four-octet number.

    Default gateway

    Specify the internet provider’s IP address that will be used to connect to the internet.

    If your provider supports auto configuration of external network interface using DHCP protocol, tick Auto Configuration via DHCP.

    In order to set up Ethernet connection follow these steps:

    1. Click on "+ Add" in the upper rightleft corner and select External Ethernet.
    Picture8.png6. Initial Configuration.png

    Attention!
    If you select Local Ethernet and set it up as External Ethernet, the internet access will not be possible.

    2. Choose the applicable NIC.Network card.

    3. Fill out the following mandatory fields:

    • NameTitle
    • IP-address/mask
    • Gateway (or tick the Automatic configuration via DHCP);
      Picture9.png7. Initial Configuration.png

    4. Check that all the data are correct and click Save.

    Setting up other types of connection

    If your provider uses another type of connection, you can see other setup manuals following the links below:

    • PPPoE protocol connection
    • VPN connection (using PPTP protocol)
    • L2TP connection
    • Ethernet connection
    • 3G and 4G connection
    • Simultaneous connection to several providers
     

    After connecting to the internet, it is necessary to register a server.