Skip to main content

Authorization by PPPoE

Authorization by PPPoE protocol involves authorization via a secure network tunnel between the user’s network device and SafeUTM server. A login/password bundle is used for user authorization. With this type of authorization, the assignment of the workstation IP address is not required, since an IP address will be assigned automatically upon successful authorization and creation of a secure network tunnel.

To set up authorization by PPPoE protocol you need to perform the following actions:

  1. Go to Users -> Authorization.
  2. Open tab VPN-Authorization.
  3. Flag PPPoE Authorization and click Save.

image-1652148013383.png

You can edit your login and password in the tab Users -> Accounts upon selection of a necessary user.

image-1652148020707.png

The user is assigned an IP address automatically from the pool of addresses for VPN configured in the section Users -> Authorization -> VPN Authorization (for example, 10.128.0.0/16).

In order to set up a static binding of addresses issued via VPN to certain users, go to Users -> Authorization -> Fixed VPN IP Addresses, click  and specify the intended user and IP address. An example of a fixed VPN IP address can be seen below:

image-1652148031324.png

 

Authorization by PPPoE is possible only in one Ethernet segment with local SafeUTM interfaces.