Skip to main content

Configuring PPPoE Connection

Connection via PPPoE protocol is traditionally used by providers offering connection via xDSL.

To configure the connection in the web interface, follow these steps:

  1. Go to menu Services -> Network Interfaces.
  2. Click on the icon (+) in the upper right corner of the window and select Ethernet + PPPoE.
  3. Select a network card.
  4. Fill in the fields listed in the table below:

Parameter

Description

Title

The name you will use to identify the interface in the future. Maximum 42 characters.

Network card

The network adapter will be used to connect to the Internet provider.

VLAN tag

The VLAN ID in which UTM will be present Such network interface is considered a VLAN interface. Fill in only if the network card is already in use.

Login

Username for PPPoE connection.

Password

Password for PPPoE connection.

Service

Service ID. If you don't know what to enter, leave the field empty.

Access concentrator (Hub)

Hub ID. If you don't know what to enter, leave the field empty.
  1. Make sure the entered values are correct and click Save.
Configuration example:
1. Configuring PPPoE Connection.png
Back to top